Truma Caravan & Motorhome Awning Warmer Kit

To be used with any Truma Heater System, the Truma Awning Warmer Kit can be used to divert the warm air distributed by the heater system straight into the awning of your caravan or motorhome, making it ideal for use during cool mornings and evenings or during the tricky transitional periods between seasons.

This version of the Truma Caravan & Motorhome Awning Warmer Kit comes in Ivory.

Truma Awning Warmer Kit contents

• 1m warm air duct
• 1 x ventilator T-piece
• 1 x shut-off
• 1 x air outlet with flap         

Truma Awning Warmer Kit benefits

• Suitable for connection with any Truma heating system with warm air distribution
• Moisture reduction in awning
• Creates a comfortable temperature beneath awning
• Easy to operate and convenient
• Straight forward to install (in less than an hour!)

The Truma Awning Warmer is suitable for connecting to warm air duct with diameters of up to 65mm.

Please note:

• Warm air duct between heater fan and blow-out flap must be a minimum of 1.5m long to avoid overheating of the outlet.

• When using the Truma Awning Warmer to heat your awning please be aware that simultaneous heating can reduce the heating power within the caravan.

• Prevent the system from being penetrated by spray water by making the caravan wall as low as possible (below the main warm air duct).