Truma Combi 2E 4E 6E Water Boiler and Space Heater

Truma complete kit 3 for campervan and motorhome

The Truma Combi is a popular choice for heating both living space and water in your campervan, motorhome or caravan. The Truma Combi 2E, 4E and 6E are energy efficient, quiet in operation and incredibly compact and lightweight for the performance it delivers. The Truma complete kit 3 includes all the items needed for installation including a digital wall-mounted control panel which is iNet ready*. The Truma Combi features an integrated 10 litre stainless steel water tank. Suitable all year round, it allows for independent heating of hot water in summer mode as well as both hot water and warm air in winter mode. Able to operate on either 230V electric mains voltage or on LPG, it provides hot water, and a warm campervan, motorhome, or caravan, whether on a camping site, or in the wild. You can even use both electric and gas energy sources in unison for rapid heating times.

Perfect for your campervan, caravan or motorhome, the Truma space heater provides consistent warmth all year round! The newly available D4E and D6E models feature the same compact design and integrated 10L water tank. Included in these models is the Truma iNet X Panel for advanced digital control and system monitoring your campervan or motorhome.

Please note, to use the Truma iNet system with your Combi, you will need a Truma iNet controller (Not included in 2E, 4E, or 6E kits), available to purchase HERE.

Truma Combi Kit 3 contains: 

• Fiamma 70L on board water tank
• Fiamma locking filler cap
• 10m of 12mm push fit water hose blue
• 10m of 12mm push fit water hose red
• Truma Combi LPG gas and 230V electric unit
• Truma CP Plus digital wall mounted control panel
• Truma cowl cover - in black only
• 10m of 65mm heater ducting pipe
• 8 x Truma heating clips
• 4 x black Truma end outlets with throttle
• 4 x Truma blown air heating nut
• 6 x John Guest (push fit) tees
• 6 x 12mm John Guest straight 
• 6 x 12mm John Guest elbows
• 1 x 055206 W4 Straight Water Pipe Adapter 12mm to 12mm - Barbed to Speedfit
• 5 x Jubilee clips
• Shurflo 30 PSI/12v/7L water pump
• 1m x 40mm water tank filler pipe (may be white or black)
• 1m x 10mm water pipe
• 1m x 12mm blue water pipe
• 1 x 12mm BSP adapter - John Guest 12mm Straight Female Adaptor
• 1 x 12mm John Guest Single Check Valve
• Shurflo Water Strainer and filter (threaded)

Please note that the Truma Room Temperature Sensor Cable is not included in the kit.

Technical Specifications:

fbt-product:

https://www.jacksonsleisure.com/caravan-campervan-motorhome/truma/room-temperature-sensor-cable-for-caravan-and-motorhome-combi-heating-system/

Dimensions (L x W x H):

510 x 450 x 300mm

Installation Dimensions (L x W x H):

540 x 500 x 350mm

Weight (When Empty of Water):

15.1kg

Water Capacity:

10 L

Heating Time (from 15°C to 60°C) (Water Only):

Approx. 20min

Heating Time (form 15°C to 60°C) (Heater + Water):

Approx. 80min

Water Pressure:

Max 2.8 Bar

Power Consumption (at 230V):

3.9A / 7.8A

Power Consumption (at 120V):

Heating up boiler 0.2A up to temporary max. of 5.6A (average approx. 1.1A)

Air Flow Rate:

Max. 287 m³/h